Incubator configurator

HettCube 400 R
HettCube 200 R
HettCube 600 R
non-refrigerated
refrigerated
IVDR
General Purpose
220 – 240 V 1 ~ / 50 – 60 Hz
100 – 120 V 1 ~ / 50 – 60 Hz

Options

Switchboard

| 4-fold socket strip, as a unit controllable via display, on the back of the device

| Cat. No. 60521
Independent PT 100 sensor

| For independent temperature measurement, four-wire system, temperature values output with analogue output 4-20 mA on the back of the device

| Cat. No. 60503
Passive dehumidification

| For individual or timed opening of a dehumidification module via the touchscreen

| Cat. No. 60042
Additional device access port (Ø 22 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60006
Additional device access port (Ø 42 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60007
Additional device access port (Ø 67 mm)

| Centred on the left side of the device. Other positions only possible after consultation

| Cat. No. 60008
Parameter for continuous cooling operation

| For storing samples below 15 °C for more than 2 weeks

| Cat. No. 60526
Glass door

| All-glass outer door for HettCube 400 | 400 R

| Cat. No. 60029
Changing the door hinge

| Change from standard door hinge right (i.e. door handle left) to door hinge left (i.e. door handle right)

 

| Cat. No. 60044

Shelves

Shelf (HTS-Set), Hight 54 mm
Cat. No. 60031

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Shelf (Set), Hight 59 mm
Cat. No. 60001

Made of stainless steel, with standard rails, max. load: 50 kg

Drawers

Drawer (HTS-Set), Hight 30 mm
Cat. No. 60024

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 65 mm
Cat. No. 60025

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Drawer (HTS-Set), Hight 105 mm
Cat. No. 60026

Made of stainless steel, with telescopic rails, pull out up to 70 %, max. load: 40 kg

Racks

Rack (HTS-Set), Hight 24 mm
Cat. No. 60036

For inclined storage of cultures (Loewenstein), stainless steel, with telescopic rails, pull out up to 70 %, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (Set), Hight 24 mm
Cat. No. 60037

For inclined storage of cultures (Loewenstein), stainless steel, with standard rails, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack, Hight 24 mm
Cat. No. 60041

For inclined storage of cultures (Loewenstein), stainless steel, inclination angle: 5°, Tube: Ø 15-20 mm, max. load: 81 tubes

Rack (HTS-Set), Hight 117 mm
Cat. No. 60038

For Petri dishes (Ø 90 mm), stainless steel, with telescopic rails, pull out up to 70 %, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack (Set), Hight 117 mm
Cat. No. 60039

For Petri dishes (Ø 90 mm) , stainless steel, with standard rails, max. load: 90 pcs.

 

For covering the entire slide-in level, additional selection of Cat. No. 60040 necessary

Rack, Hight 117 mm
Cat. No. 60040

Additional rack for 60038 or 60039, for Petri dishes (Ø 90 mm), stainless steel, max. load: 90 pcs.

Frames

Frame L, 16-place
Cat. No. 60027

Made of stainless steel, for inclined storage of cultures, angle of inclination: 5° or 20°, for 16 tubes with Ø 15-20 mm, length 100-125 mm

 

Max. 3 racks possible per insertion shelf/drawer

Frame XL, 16-place
Cat. No. 60028

Made of stainless steel, for inclined storage of cultures, angle of inclination: 5° or 20° for 16 tubes with Ø 15-20 mm, length 126-170 mm

 

Max. 2 racks possible per insertion shelf/drawer

Additions to your selection

USB Port Lock (Set)

| For securing the USB-A interface. Set consisting of 10 securing clips and 1 USB key tool

| Cat. No. 60525
Fixing kit (HTS-Set)

| For fixing of shelfs and drawers with telescopic rails

| Cat. No. 60919

LLL:currentConfiguration

1
1
2
3

Max. load

total occupied available 100,00 kg 16,00 kg 84,00 kg

Items

1 x
Shelf (HTS-Set), Hight 54 mm | Cat. No. 60031
The inner height for this Shelf is 24 mm. Do you want to place taller items? Please select the height of the tallest item you want to place to get a visual preview.
1
3 x
Shelf (Set), Hight 59 mm | Cat. No. 60001
The inner height for this Shelf is 29 mm. Do you want to place taller items? Please select the height of the tallest item you want to place to get a visual preview.
1
2
3